Home
>
SAFETY ENVIRONMENT
>
Hydrocarbon filter
>
Petro-PIPE
>
Internal prefilter replacement for PETRO-PIPE® filter (set of 4)

Foam and maintenance mesh for hydrocarbons drainage

Changing the internal elements for SPI PETRO-PIPE cartridge

Internal filter replacement for PETRO-PIPE® PI616M2 TECHNIKELEC

Foam on mesh for rainwater filtration SANERGRID

Maintenance foam for optimal oil-water separation on ERT ERTF

Replacement black mesh to filter out particulate matter

Internal prefilter replacement for PETRO-PIPE® filter (set of 4)

PETRO-PIPE® Hydrocarbon filtration cartridge for drainage of oil bund and retention pit

PETRO-PIPE® synthetic esters filter for drainage of retention tanks (Ø inlet : 2'' male)

Even without hydrocarbon or ester pollution, the PETRO-PIPE^® filter can sometimes be clogged by too many impurities in the drainage water. The internal pre-filter installed in the head of the SPI^® filter is made of foam and a black diffuser; it must be changed regularly to ensure optimal drainage of the wasterwater.

€64.00 (tax excl.)

In stock

Delivery within 72h

Size chart

Women's clothing size

Size	XS	S	M	L
Euro	32/34	36	38	40
USA	0/2	4	6	8
Bust(in)	31-32	33	34	36
Bust(cm)	80.5-82.5	84.5	87	92
Waist(in)	24-25	26	27	29
Waist(cm)	62.5-64.5	66.5	69	74
Hips(in)	34-35	36	37	39
Hips(cm)	87.5-89.5	91.5	94	99

How To Measure Your Bust

With your arms relaxed at your sides, measure around the fullest part of your chest.

How To Measure Your Waist

Measure around the narrowest part of your natural waist, generally around the belly button. To ensure a comfortable fit, keep one finger between the measuring tape and your body.

Reference:

RF-PI616M2

Description

In order for PETRO-PIPE^® filters to maintain sufficient flow, the internal pre-filter must be kept as clean as possible. If there are too many impurities in the drainage water and even with an external pre-filter box type PFB, the foam and black mesh in the cartridge must be changed. Sold by sets of 4, excluding filter.

Steps to follow:

Unscrew the top of the PETRO-PIPE^® cartridge,
Remove all internals,
Place the replacement foam inside the cartridge,
Add the black mesh over the foam,
Close the top part and tighten strongly.

Product Details

Reference RF-PI616M2

Attachments

Créer un devis (FR)

Devenez votre propre deviseur

Download (738.99k)

Create a quotation (EN)

Become your own devisor

Download (667.53k)

Product videos

Manufacturer

SPI^® has been an Eastern American manufacturer based in Connecticut for 30 years. Bill Gannon founded SPI^® in 1991 to develop a technology for solidifying polluting oils. His experience as Vice President of Liquid Waste Technologies from 1985 to 1991 and the Exxon Valdez disaster in 1989 were key elements in the creation of SPI^®.

In the early years, SPI^® focused on waste treatment by creating solidifiers for oils (Oil Bond) and for water (WaterBond). Then, in the years that followed, SPI^® naturally turned to pollution prevention.

SPI^® offers its patented PETRO-PIT^®, PETRO-PLUG^®, PETRO-PIPE^® and PETRO-BARRIER^® products to all customers who need to secure their retention equipment with a passive and inexpensive solution, thus allowing good drainage of rainwater without risk of overflow and therefore pollution.

No oil has ever drained from any SPI^® filter. SPI^® filters comply with American EPA SPCC standards, European and French standards on water treatment in light hydrocarbon separators as well as the water law (hydrocarbon content of water at the filter outlet less than 5 ppm , ICPE compliant). For three decades, thousands of installations have been protected by SPI^® products in North America, Europe and Latin America. Its approval with the largest petrochemical industries, power companies and local authorities gives it an obvious strength to innovate in the filtration and solidification of new pollutants (natural esters FR3-COPPER, synthetic esters MIDEL7131) and find the solution for which you need.